Fiat 500 Key Fob Replacement
If your 500 key fob doesn't work, try using another one to see if your car can detect it. If it does, the issue is likely related to the battery, or water damage on the fob that was originally used.
First, replace the battery. Make sure the new #CR2032 coin battery is correctly inserted with the "+" side facing downwards in the fob.
Dead Battery
The majority of the time, when a fob isn't working it's because the battery is dead. It's easy to fix, and most fobs give you a warning if the battery is low. You can find the instructions on YouTube? for nearly any key fob in your car or in the owner's manual. You can also take it to a locksmith in your area or the dealer who sold it to you to replace it.
Sometimes a fob will stop working due to a problem on the internal circuit board. It's not common, but it does occur. If you drop the fob onto something hard, it can damage the internal chip. This can also happen when you use an aftermarket key and the fob doesn't work. In this scenario you'll need to go to an expert locksmith or dealer and have it reprogRammed to work with your 500.
One 2012 FIAT 500 Flip Key Remote - resembles Ilco brand with lock, unlock and trunk buttons - new replacement keyless entry remote (will need to be cut & programmed by a locksmith)
Damaged Chip
A key fob from Fiat 500 is an wireless device that sends the signal needed for the car to start after you press the button. It has a microchip that holds information about the code needed to connect with your car. If the chip is damaged it won't transmit the correct code, and the car won't begin. It is possible to repair this kind of damage and a locksmith can assist. United Locksmith can complete this repair on both traditional and modern models, so don't hesitate to contact us.
You can purchase a brand new fob and have it professionally programmed by locksmiths. It's less expensive to do this instead of going to the dealer, and it is just as effective. You'll have to provide certain details to the locksmith, like the year that your car was manufactured and its model.
If you're not sure of the best solution to this issue try rub the chip with the help of a US dollar bill. The copper in the bill is abrasive enough take away oxidation and dirt but it won't cause any harm to the microchip. The chip may not be repairable in the event that it has been physically damaged. This could happen if fall it, ram it over with your vehicle or other form of physical strain.
Water Damage
Water damage is likely to occur on your device, whether you dropped them in the water accidentally or put them in a pocket while swimming, or splashed water on them in a rainy afternoon. Even if you only have some water on the key, this can cause major problems with its electronics and hinder it from working efficiently.
It is possible to solve this issue yourself by removing the fob and cleaning it with a towel. Once the fob is dry it is possible to replace its battery. It will then begin working properly.
You can take it to an auto repair shop or locksmith to get it professionally programmed and cleaned. The professionals are able to utilize special equipment to ensure that the key fob works with the car's computer system.
img width="456" src="
">
When the key fob on your Fiat 500 stops working, you may be frustrated and overwhelmed. It is tempting to visit a dealer to replace your key fob however this could be expensive and unaffordable. Locksmiths can replace your key fob without having to visit an establishment. https://www.g28carkeys.co.uk/fiat-car-key-replacements-near-me/ are a better choice over a dealer as they can take care of all aspects of your car's key fob replacement without the need for a dealer visit.
Pairing Issues
If you lose your keyfob, or it ceases to function and nothing else seems to be wrong, it may be the chip. It could be because of water damage or an unresponsive battery.
This can be accomplished by simply following the instructions in your owner's manual. If you're having issues or your manual doesn't work and you need to have an automotive locksmith take care of this task. This will ensure that the chip is not damaged, and is the least expensive alternative.
A few hundred owners have reported that their key fobs do not lock their vehicles. This can be a big problem if you're heading to a gas station and want to fill up. Some owners have reported that their 500's locking system has malfunctioned and they've needed to replace the entire intermediate steering shaft. This problem has actually been reported in a technical service bulletin (TSB) from Fiat.
If you're having problems with your Fiat vehicle, an experienced locksmith can assist. They'll be able to duplicate the key you have or make you new keys that lock and start the vehicle. They're able to make this happen without ever seeing your old key and are generally much cheaper than getting it from the dealership.
![[PukiWiki]](image/pukiwiki.png "[PukiWiki]")
