How to Find a Fiat 500 Spare Key
Fiat's classic Fiat 500 has become a cult classic since its relaunched in 2007. The company has now launched an even bigger attack on different powertrains by launching a mild hybrid version.
The replacement of the key fob batteries on a Fiat 500 are simple and affordable. It takes approximately 10 days for the key to be shipped from the Fiat main dealer.
Diagnostics of a fault
The key fob is equipped with an electronic chip that communicates with Fiat's immobiliser system to ensure that only authorized vehicles are able to start engines. If the transponder in your key fob has been damaged the chip will not be able to connect to the immobiliser, which means that your vehicle won't start.
It is possible to repair a key fob that has been damaged, as long that the chip isn't physically harmed. A professional locksmith will utilize standard technologies from dealers to repair it swiftly.
Using an OBD scanner, it's possible to determine if the fob is still communicating with the receiver module. This is a fast and simple process that could give you a first indication of the problem. If the OBD scanner indicates that there is no communication between the receiver and transmitter modules, it might be required for the fob's transceiver module to be replaced. This is a costly solution and should be left to locksmiths.
https://www.g28carkeys.co.uk/fiat-car-key-replacements-near-me/ is the most common reason for the key fob to not function. This is an easy fix that takes about a couple of minutes. Ensure that the key fob is seen by your vehicle. Then, press the "Lock" or "Unlock" button to determine if the key fob responds.
The key fob could not work at all, or perhaps only intermittently, if out of range. This could also be an indication that the circuit board inside the key fob has failed. In this instance you'll need to check the manual of the owner for instructions on how to reprogram the key fob.
The mechanical latch can be removed from the back of the key fob. (See the image below). Then, gently pry the edge of battery holder away from the switch to remove the old coin-cell battery. Insert a new #CR2032 3 volt battery into the fob with the "+ side" facing the rear cover and the " side" directed towards the buttons made of rubber.
Water Damage
The key fob is not waterproof even though it is fitted with rubber seals to prevent water from getting inside the electronic chip. The key fob should be fine in the event of the splash of rain or water from a wash cycle, but submerging it in the ocean or in pool water is not recommended.
img width="373" src="
">
The key fob needs to be reprogrammed when it is exposed to water. Follow the steps in the owner's guideline, or go to an experienced locksmith or Fiat dealer.
A fob that's out of range may not function. Key fobs generally have a range of 30 feet, and if they're too far away from the car, it won't be able recognize them. For starters, try moving closer to your car. If this doesn't work, you may have to replace the key fob. You can find instructions on how to replace the battery on most vehicles on YouTube? or by reading the owner's guide. If your key fob appears damaged and scratched, then it's time to replace it.
Faulty Receiver Module
Fiat's more modern models do not require the use of a physical key to start or open the car. They use an electronic remote control that sends an encrypted wireless signal to the car in order to turn the engine off and on. If you have a broken key fob, a locksmith can replace it for you. You will save time and money by leaving the job to the experts. They can also program a brand new key for your Fiat.
You'll have to provide the locksmith with some information over the phone when you want a spare Fiat key. For instance, you will have to provide the year of manufacture of your car as well as the name of the model. This is vital since the locksmith will require this information to ensure that the new key will work with the existing locks.
It is important to note that not all locksmiths are able create replacement keys for Fiat vehicles. It is important to choose one with a good reputation and has experience in this field. This means that you are certain that the key will work with your car and you won't be wasting money.
Keys that are not paired
If you have a keyfob that has stopped functioning, the main reason is the battery is dead. The key fob comes with metal retaining clips that hold the button cell in place and complete the circuit, so if they become worn or loosened, it can lead to contact problems and a lack of power. Replace the battery by the same one, but with a different design.
If the key fob has been submerged in water, it's essential to dry it before re-inserting it. Using isopropyl alcohol or electronic cleaner is a great method of doing this. It is also advisable to take the battery off and clean the circuit board prior to replacing it.
Contacting locksmiths is the best option in case you are unable to locate an alternative. A locksmith qualified to reprogram Fiat transponder keys can do this without having to see the original keys. This is a speedier and cheaper option rather than waiting for the original Fiat key from Italy to arrive. A professional locksmith has the tools and equipment to replace your keys as quickly as is feasible.
![[PukiWiki]](image/pukiwiki.png "[PukiWiki]")
