Peugeot 308 Key Fob Problems and How to Fix Them
If your Peugeot key fob suddenly stopped functioning, it could be due to an inoperative battery for the coin-cell or water damage, receiver module issues, or a malfunctioning chip. These are all easy solutions that will get your car back to speed in a matter of minutes!
The key blade could become worn-out and cause a faulty car key. You can easily fix the issue by visiting your local Car Key Man Auto Locksmith to replace the blade.
Battery
The battery of the key fob in your Peugeot 308 can sometimes die or become too weak to send a strong signal to the car. The key fob may not function and stop you from locking or unlocking your doors or even starting the engine. To fix this issue, you'll have to replace the battery inside the key fob.
You can purchase a new battery at an auto parts shop, or at your local hardware store. When you purchase the battery ensure that it's new and hasn't sat on the shelf for a long time. A brand new battery is more capacity and can transmit a stronger signal your vehicle.
After replacing the battery try unlocking the doors and locking them with the key fob. If the doors don't unlock it is most likely with the car's receiver module which can be changed by your local Peugeot dealer.
It's also possible that the key fob's internal chip has been damaged. It is possible to cause damage to your key fob when you drop it on the ground or expose it to water. The rubber seals that shield the chip from moisture may be worn down over time, particularly if your key fob is exposed to water for lengthy periods of time like submerging it in the ocean at the beach. To avoid this occurring, it's crucial to protect your key fob from water and never let it come in contact with water.
Water Damage
Don't let go of your key fob when it becomes wet, whether you dropped it into an aquisition or stumbled into a water puddle. While the key fob comes with rubber seals to protect it from water, prolonged exposure to water could cause damage to its electronic chip. Since water is a good conductor and conductor, any water that gets inside the key fob will result in a series of short circuits which will eventually destroy the chip. After removing the batteries, clean the contacts with isopropyl. Dry them completely before putting them back in.
Your Peugeot 308 may not start due to the battery being dead. Jumper cables can be a great method to start the engine when you have an additional car. If the battery is the problem and it is not working, it should be replaced.
Another possible cause is a bad receiver in the vehicle, which can prevent it from receiving a signal from the key fob. The key fob could be damaged or there may be a problem with the antenna, wiring, or the key fob itself. It might be necessary to program a new keyfob for your vehicle if using one. If you're not able to solve the issue, you should contact an expert technician. A professional who has been trained in the field will be able to determine the issue quickly and resolve it quickly.
Radio Interference
Signs like keys not being recognized or having a restricted range typically indicate that there is a problem with the system. It is either radiated or conducted, with the latter resultant from power supply cables and the speaker wiring being too close to electrical components. Generally, re-routing the cables or moving them further away from the components may solve the problem.
It's unlikely someone is watching your key fob's signal in attempt to steal your vehicle It's possible, however, that radio interference has drowned out the signal. Luckily, this is a simple issue to repair.
img width="492" src="
">
If https://www.thekeylab.co.uk/peugeot-car-keys/ experiencing a problem with your key fob not being recognized, try an entirely new battery. Make sure that the battery is of the correct size and type. Incorrectly sized batteries can damage the fob.
Certain alarm systems from the aftermarket and radar detectors operate on the same radio frequency as your key fob, and this can cause them to interfere with your key signals. It is best to avoid having these devices attached to your key fob.
Pairing Issues
The remote keyless entry system of the car is equipped with a receiver which receives radio frequencies from the key fob. If this receiver develops an issue, you will not be in a position to begin your vehicle even if the key fob is working and can be reprogrammed. This issue could be caused in a number of ways, including by a dead battery in the coin-cell, or water damage. The receiver may also be malfunctioning due to an error in the software or internal damage to the key itself.
The coin battery in your Peugeot 308 keyfob is likely to have failed. You can replace it with a brand new battery however, it's important to choose the right battery for your key fob. It is recommended to use one that is the same size with the same voltage, specifications, and specifications as the original.
Your Peugeot 308 keyfob may not work if it is paired with a different vehicle. It is possible that you have accidentally given the key fob to a friend or the key was used to unlock other vehicles. This can be resolved by reprogramming the fob using an OBDII scanner. The scanner will usually ask you for specific information about your vehicle, for example the VIN or engine type, so it's crucial that you fill in the correct information.
![[PukiWiki]](image/pukiwiki.png "[PukiWiki]")
