How to Replace a Nissan Juke Spare Key
Nissan Juke is an attractive and fun hatchback that has a unique engine configuration. It's a bit noisy but still a blast to drive.
Replace the battery for the key fob of your Nissan Juke every two years, or when it's low. You can do it yourself, but you'll need tools.
Dead Coin Battery
If your Nissan Juke key fob isn't working the first thing you should be sure of is the battery that is inside it. It could be dead and requires to be replaced, which is a straightforward fix that only takes a few minutes. You can do this by flipping the fob over and removing the tiny latch/release on the back. Remove the battery from the old one and then pop in an alternative one, making sure it's facing down on the fob. Line between the two halves of fob in a carefully.
If the fob has been exposed to water, it will need to be cleaned before putting the new battery in. This can be accomplished using a paper towel, isopropyl alcohol or electronic cleaner, and then waiting for it to dry completely before re-inserting the battery.
The key fob needs to be paired with the car to start it. This can be done by following the instructions in the owner's manual, or an OBDII scanner. The most likely reason why the key fob was not functioning is because it wasn't properly paired. It could also be that the fob is equipped with a faulty chip, but this is a rare occurrence. In this scenario an entirely new receiver module could be needed. If this is the case the receiver module will need to be replaced by a professional technician.
Water Damage
Key fobs operate on batteries and the batteries should be replaced every two years, or as soon as your car stops responding when you press the "start" switch. Keys come with rubber seals that keep water out, however submerging the key fob into a pool or ocean water could damage the chip inside the. If this is the case then you'll need an alternative key from Nissan or a locksmith.
img width="341" src="
">
It's possible that the computer has lost connection to the key fob This could be due to a variety of reasons. A simple restart of the vehicle could fix the issue, however if the key's still showing the "Key ID" error message, you'll need contact Nissan or an auto locksmith to get help.
Three common causes are dead battery on the key fob, a key that is not programmed, and a damaged key fob that is damaged. The first two causes can be fixed fairly easily, while the third is more difficult to diagnose and fix however, it can be fixed with patience. Compare Nissan Key Replacement costs near you using WhoCanFixMyCar? and book your repair online. It takes just a few seconds, and you can even read reviews of customers from local garages, Nissan car mechanics and dealerships before you decide.
Faulty Chip
The key fob of your Nissan Juke has a special chip that sends an alert to the car every time you turn it. If the chip is not functioning properly it could cause the key to stop functioning. If this is the case, the problem can only be solved by replacing the key. There are several reasons why your Nissan Juke's key may be faulty, including water damage or a dead battery for your coin, or a broken receiver module.
If https://www.thekeylab.co.uk/nissan-car-keys/ stopped working after a soak in the wash or even a bath, it is important to examine the chip for water damage. Make sure the retaining clips on the chip are securely. Also, make sure the chip isn't surrounded by water. If you notice any indications of water damage, try taking off the battery and wiping down the electronic component with isopropyl alcohol, or electronic cleaner.
If the chip is defective, you'll need to contact your local locksmith or dealer. They will need to know the year the make, model, and year of your vehicle to locate the replacement. It is also necessary to record the VIN (Vehicle Identification Number) so that the locksmith or dealer knows precisely which key you own. This will enable them to locate the correct key code and confirm that they cut the correct one.
Faulty Receiver Module
The key fob sends a radio signal to your vehicle, allowing it to perform various functions. It can open your trunk while you hurry with groceries to your car or start your car by pressing an icon on the fob. It can even open your windows and switch on the horn should you have a mishap and lock your keys inside the car.
If the key fob stops working, there may be a problem with the receiver module within the vehicle. The receiver modules are tuned to receive specific frequencies that match the signals generated by the Nissan key fob. If your car has an inoperable receiver module and it stops responding to any signal from the key fob.
It is always a good idea to have an extra Nissan key fob in case your original key is lost or breaks. A locksmith or dealership can program the spare key to work with your Nissan. This will help you avoid the hassle of losing your keys or locking them in your car.
If your Nissan Juke's key fob was exposed to rain or clean tap water, you can solve the problem by cleaning it using isopropyl, or an electronic cleaner. If the chip is fried it will be necessary to purchase a new key fob that is programmed to your car by a locksmith or a dealer.
![[PukiWiki]](image/pukiwiki.png "[PukiWiki]")
