Peugeot 308 Key Fob Problems and How to Fix Them
If your Peugeot key fob suddenly stopped working it could be due to a dead battery in the coin-cell unit or water damage, receiver module issues, or a defective chip. These are all easy fixes that can get your car back up to speed in a matter of minutes!
Car keys can also fail due to the fact that the blade on the key gets worn. This is a simple fix if you visit your local Car Key Man Auto Locksmith and let them put in the new blade for you.
Battery
The battery for the key fob in your Peugeot 308 can sometimes die or become weak enough to send a strong signal to the car. The key fob can stop working and prevent you from locking or unlocking your doors, or even starting your engine. To fix this issue, you'll need to replace the battery on the key fob.
You'll need to buy the replacement battery from an auto parts shop or your local hardware store. When you purchase the battery ensure that it's new and hasn't been on the shelf for a long time. A brand new battery is more capacity and can send a stronger signal to your vehicle.
After replacing the battery After replacing the battery, try locking and unlocking the doors of your Peugeot with the key fob. If the doors won't https://www.thekeylab.co.uk/peugeot-car-keys/ it's possible that the receiver module in the car is the cause. The local Peugeot dealer can reprogram the receiver module.
The chip inside the key fob may also be damaged. It's possible to cause damage to your key fob if you drop it on the ground, or expose it to moisture. Rubber seals that shield your chip from moisture may wear out over time. This is especially true if you expose your key fob to water for prolonged periods of time, such as swimming it in the ocean. To avoid this from occurring, it's crucial to keep your key fob safe from water and never let it come in contact with water.
Water Damage
Don't give up on your key fob when it becomes wet, whether you dropped it into the pool or slipped into a Puddle. The key fob is protected by rubber seals however, prolonged exposure to water can harm its electronic chip. Water is a great conductor, and any water that is absorbed into the key fob will trigger short circuits in series, which will eventually ruin the electronic chip. After taking the battery out, clean the contacts with isopropyl alcohol, and dry it off completely before putting it back into.
A dead battery might be the reason that your Peugeot 308 won't start. Jumper cables are a fantastic method to start the engine when you have an extra car. If the battery is the issue the battery will need to be replaced.
Another reason could be a bad receiver in the vehicle that could block the signal from the key fob. It could be a issue with the antenna, or wiring, or the key fob may be damaged. It might be necessary to program a new keyfob for your vehicle if you are using one. If you are unable to solve the issue yourself then contact a professional technician. A trained technician will be able to determine the issue quickly and resolve it in a timely manner.
img width="333" src="
">
Radio Interference
The signs of a key fobs that are not recognized or having a restricted range usually indicate that there is an interference in the system. The interference could be transmitted or radiated which is caused by power cables and speaker cables being too close to electrical components. In general, rerouting cables or moving them away from these components can solve the problem.
It's unlikely that someone is monitoring the signals from your key fob to steal your car, but it is possible that the signal has been masked by radio frequency interference. This is a simple issue to solve.
If your key fobs that aren't recognized, try an entirely new battery. Make sure that the battery is of the correct size and type. Batteries that aren't the correct size can damage your fob.
Certain alarm systems and radar detectors use the same radio frequency as your key fob, and this can cause them to interfere with your key signals. Avoid attaching these devices to your key fob.
Pairing Issues
A car's remote keyless entry system includes an antenna that receives radio frequency signals from the key fob. If the receiver is experiencing issues, you will not be in a position to start your car even if your key fob is functional and is modified. This problem can be caused in a number different ways, such as the battery of the coin-cell being dead or water damage. The receiver could also be faulty due to a software error or internal damage in the key.
The battery that powers your Peugeot 308 keyfob has likely died. You can easily replace this with a brand new battery however, it is essential to choose the right battery for your key fob. A bad battery can cause further issues with the key fob, so it is best to choose the original battery or the replacement that is identical in size, voltage, and specification.
Your Peugeot 308 keyfob may not function if it was associated with a different vehicle. You might have accidentally given your key fob to someone else, or the key was used to unlock other vehicles. You can fix this by reprogramming your key fob using an OBDII scanner. This tool will usually ask you for specific information regarding the vehicle, such as the VIN or engine type, so it's important to fill in the correct information.
![[PukiWiki]](image/pukiwiki.png "[PukiWiki]")
