Peugeot 308 Key Fob Problems and How to Fix Them
If your Peugeot 308 key fob stopped functioning one day, it could be due to a dead battery in the coin or water damage and receiver module issues or a malfunctioning electronic chip. Fortunately, all of these are simple to fix and you'll be able to get your car back to normal in no time at all!
Car keys can also be damaged due to the fact that the blade on the key gets worn. It is easy to fix this problem by visiting your local Car Key Man Auto Locksmith to replace the blade.
Battery
The key fob of your Peugeot 308 may die or become weak enough to not transmit a strong signal. This can cause the key fob to stop functioning and prevent you from opening and locking the doors, or even starting your engine. To fix this issue, you'll have to replace the battery inside your key fob.
You can buy a brand new battery at an auto parts store or at your local hardware store. Make sure that the battery is brand new and has not on the counter for too long. A new battery has greater capacity and will transmit a stronger signal to your vehicle.
After replacing the battery try unlocking the doors and locking them with the key fob. If the doors won't unlock then the receiver module in the car is the culprit. Your local Peugeot dealer can reprogramme the receiver module.
img width="319" src="
">
It's possible that the key fob's internal chip is damaged. This could happen if you drop your key fob on the ground or expose it to water. Rubber seals that shield your chip from moisture might get worn out over time. This is especially the case if you expose your key fob to water over long periods of time, such as swimming it in the ocean. To stop this from happening, you must protect your key fob from moisture and to never let it come into contact with water.
Water Damage
If your key fob becomes wet regardless of whether you tossed it into the pool or threw it into a puddle don't think it's a loss. Although the key fob is equipped with rubber seals that should protect it from water, long-term exposure to water could cause damage to its electronic chip. Since water is such a good conductor and conductor, any water that makes it inside the key fob can cause a series of short circuits that will eventually damage the chip. After removing the batteries clean its contacts with isopropyl and then dry them completely before putting them back in.
A dead battery could be the reason that your Peugeot 308 won't start. If you have an extra car, jumper cables could be used to start the engine again. If the battery is faulty the battery must be replaced.
A poor receiver in the car may also hinder it from receiving the signal from the keyfob. The key fob might be damaged or there could be an issue with the antenna, wiring or even the key fob itself. If you have the latest key fob, it may need to be programmed to your vehicle. If you are unable solve the issue yourself call an expert technician. A technician who is trained in the field will be able to diagnose the problem quickly, and resolve it quickly.
Radio Interference
Interference can result in symptoms like a key fob that is not recognized or has a narrow range. The interference can be transmitted or radiated which is caused by power and speaker cables that are too close to electrical parts. In general, rerouting cables or moving them away from these components can solve the issue.
It's unlikely that someone is watching your key fob's signal in order to steal your vehicle however it is possible that radio frequency interference has drowned out the signal. This is an easy issue to resolve.
If https://www.thekeylab.co.uk/peugeot-car-keys/ fob isn't being recognized by the system, try a new battery. Also, make sure that the battery you are using is the correct size and type. Incorrectly sized batteries can damage the fob.
Certain alarm systems and radar detectors use the same radio frequency as your key fob and this could cause them to interfere with your key signals. Avoid attaching these devices to your key fob.
Pairing Issues
A car's remote keyless entry system is a receiver that receives radio frequency signals from the key fob. If the receiver has developed issues, you will not be in a position to start your car regardless of whether the key fob is functional and can be modified. The issue can be caused in a number of ways, including by the battery of the coin-cell being dead or water damage. The receiver may be malfunctioning because of a software error or internal damage to the key itself.
One of the most common reasons for why your Peugeot 308 key fob isn't working is that the battery inside has failed. The battery can be easily replaced, however you must ensure that it's the right battery for your keyfob. It is best to use batteries that are the same size as well as voltage and specifications as the original.
Your Peugeot 308 keyfob may not work if it is linked to an unrelated vehicle. This could happen if you have given your key fob away to a friend or in the event that the key was used to unlock and begin other vehicles. You can fix this by reprogramming your key fob using an OBDII scanner. This scanner will typically ask you for certain information regarding your vehicle, like the VIN or engine type, and it is essential to fill in the correct information.
![[PukiWiki]](image/pukiwiki.png "[PukiWiki]")
