Replace Nissan Key Fob Batteries
If your Nissan key fob isn't responding properly to your commands, it's a sign that its battery is dead. Fortunately, this is an easy fix that most people are able to do themselves.
To change the battery, you can buy an alternative one from a hardware shop or consult your owner's guide for the model you own.
Change the Battery
The key fob in your Nissan model has a built in battery that could eventually lose its charge. The key fob's battery can be replaced within a matter of minutes. First, you'll have to purchase a replacement CR2032 3V battery. It's a tiny coin cell battery often used in key fobs and it can be found in a variety of convenience stores. You'll also require gloves (latex or non-latex) and small screwdrivers with flat heads to open the fob. Consult your owner's guide for a detailed guideline and steps before starting.
Once you have the brand new battery, remove the old one by turning the fob upside down and looking at the backside. There is a tiny catch that you must release by pulling it down. This will take the mechanical key from the original position inside the fob.
Next, insert the new battery and make sure that it's oriented correctly. Once the battery is placed close the fob and click the two sides together. After completing this last step make sure to test your key fob by pressing the unlock button and seeing what happens. If everything is in working order, you can now take advantage of the Nissan's numerous features. After replacing the battery, it's recommended to re-program your key fob to ensure that it's working properly.
Replace the Transmitter
Your key fob serves as the "key" to many of your car's most important functions, it could be a huge loss in the event that you lose or damage it. A damaged or malfunctioning key fob can prevent you from locking or starting your car.
It's a smart idea to keep a spare keyfob at for in the event of an emergency. Luckily, the process of replacing your Nissan key fob is straightforward. The process of replacing your Nissan key fob is fairly easy. You'll require an entirely new flathead screwdriver and a new battery to take out the old.
You'll need an oval Panasonic CR 2032 3V battery (you can usually find them in multipacks, for less than $5 USD). The battery is located within the back of the key fob's half and you'll need gently push the two halves to expose it. Utilize a small flathead screwdriver and pull the clip on top of the battery to lift it out, making a note of its location. Replace the battery, then assemble the key fob. Test it to ensure it is working.
https://www.thekeylab.co.uk/nissan-car-keys/ will eventually wear out and need to be replaced just like any other electronic device. Make sure your key fob is protected from water, magnetic fields and physical impacts. Don't drop it, or apply too much pressure to the device.
img width="447" src="
">
Replace the Key
If your Nissan key fob fails, you cannot use it to unlock your car or start it. That's a problem for people who have to go to work in Detroit or run errands close to Dearborn or enjoy an evening out close to Troy.
It's not that difficult to change the battery in your Nissan Smart Key. You can replace the battery at home, or at the dealership. A pack typically costs $5 or less.
Start by flipping the fob over and then pushing a small catch on the back. This will release the emergency mechanical key within. While you won't have the ability to use the emergency key to start your car it will let you open the door.
Find a small slit at the top of the casing. These are great to put a screwdriver into, allowing you to pry the two parts of the key fob. Once you have access to the battery inside, take it out and make note of its position. When you're ready to put back together the key fob, simply slide the new battery into its position and snap the two parts of the case. Insert the mechanical key and your Nissan smartkey will work like a normal key.
Other Issues
A lot of modern cars have key fobs that allow you to lock them and open them without having a physical key. The key fob uses a transmitter to connect to the computer system of the car.
If your Nissan key fob doesn't work after you replace the battery, there could be a number of reasons why. For instance, the new battery may not be seated correctly inside the key fob. A reset of the key fob is another possibility. This is an easy process that you can do at home using a few tools.
For instance, you'll need the screwdriver, which should be preferably a flat head to pry open the key fob to remove the old battery. After that, using a screwdriver, pry the back of the keyfob open and then insert the new batteries. Then, you'll need modify the key fob's programming so that it can work with your vehicle.
You can easily program your Nissan key fob by yourself, since they're all user-programmable. This is usually accomplished by inserting your keyfob into the ignition two times in five minutes. If this doesn't work, you can take your key fob in to a dealer or an auto locksmith to get it programmed. The cost of this will depend on the person you call and the type of car you own.
![[PukiWiki]](image/pukiwiki.png "[PukiWiki]")
