Double Glazed Window Repair
It is worth looking into the warranty that comes with the majority of double-glazed windows. In general, it covers problems with the window hardware - hinges and locking mechanisms - within the first 10 years.
A crack in the seal is usually the reason for mist appearing between your glass windows. This issue must be addressed immediately to prevent mould or damp forming in your home.
Condensation Between the Windows
If condensation appears between your windows, this is an indication that the seal holding in the insulating gases has failed. This could be a major problem that should be addressed as soon as possible especially in winter when humidity is at its highest. It could also cause damage to the sills or sealants and also cause mould.
Double-glazed windows shouldn't have condensation between the panes. However, it is not uncommon to have extreme humidity or a cold snap to trigger this problem. Fortunately, this issue is repairable without having to replace the entire window. A professional can make tiny holes in the window and spray a special cleaning solution inside. The water is then drained from the window. Additionally, an anti-fogger is fitted to prevent future moisture buildup.
Condensation between the windows can also occur due to air leakage or other causes outside the window. If this is the situation, it is likely to take longer for moisture to gather inside the window, since the air must be sufficiently warm for the water molecules to evaporate. In these cases it is best to replace double-glazed windows rather than attempt to repair the sealed units.
Double-glazed glass windows are comprised of two or more pieces of tempered, insulated glass that are held together by a framework made of metal. The gap between the two of the windows is filled with a non-toxic insulating gas such as argon or krypton and then sealed. The seal is responsible for stopping the gas that is insulating from escape and also prevents air and moisture from entering into the gap.
As the windows get older, the seals get worse and let moisture in the gaps between the glass panes. When seals fail, it is important to recognize this as it indicates that the double glazing no longer performs as well as before. This could result in lower energy efficiency, a rise in heating bills, damage to the properties and the risk of condensation between the windows.
Mist
It is normal to see condensation appear on your windows. This means that your double glazing system is functioning correctly and is able to maintain the heat inside your home. The condensation is caused by the outside air is hotter than the glass, and it reaches the dew point of the window prior to the air inside. Double glazing of top quality is a great way to get this.
If the condensation is on the inside of your window, it could be a sign of a ventilation issue in your home. This is because the excess moisture has nowhere to go and ends up on your window as well as in carpets, on furniture and in other places within your home. This can be avoided by having it inspected by a professional and making sure that there is sufficient fresh air in the house.
Another reason for mist on double-glazed windows is because the seal between two panes of glass has been broken. This can be caused by wear and tear or due to the use of chemical cleaning products. The most effective solution is to get the windows fixed as soon as you can.
Repairing your windows professionally will ensure that they are fog-free, free of condensation and free of misting. It is also less expensive than replacing the windows and you'll save money on your energy bill.
A registered window installer with FENSA will provide you with a cost estimate to repair or replace your double glazed windows. If your windows are very old and have been in use for a while you may want to consider changing them to new A-rated energy efficient windows.
It is a good idea to retain copies of any agreements and warranties with your window installers. It will be helpful if you have any future problems with your windows. You can contact your window fitters and resolve the problem. This is a far better option than not addressing the issue, which will only get worse and could cause other issues in your home.
It is difficult to open or close
When double glazed windows are difficult to open and close it's not just a nuisance, it can lead to higher energy bills because of the loss of heat and draughts. It can also be a security problem, particularly if the locks aren't working correctly. It is essential to fix any issues with double glazed windows and doors when you spot them.
If you've attempted to open your window using the simplest methods, such as using a screwdriver or tapping on the frame using a solid object, the problem could be more serious. The window may have moved and needs to be re-set or there may be a gap between the glass and frames. In either of these scenarios, you must call in a professional double glazing repair expert to ensure that the correct repairs are done and to prevent any further problems.
It's not common to find UPVC window handles and lock mechanisms to become stuck or hard to operate particularly when they're worn out and worn. This is due to an accumulation of grease or dirt inside the handle. This can be cured by cleaning it with a uPVC cleaner. If this doesn't work then you can try gently tapping the uPVC frame with a hard object such as a screwdriver, taking care not to harm the handle or the window handle mechanism.
If this doesn't solve the issue, then the window may have to be replaced, as it is likely that the hinges are no properly aligned or the locking mechanisms are damaged. In this instance, you must contact a specialist UPVC window repair expert.
David The Window Wizard specialises in all technical aspects of double glazed repair of doors and windows, including fixing a jammed or locked shut double glass window. https://www.repairmywindowsanddoors.co.uk/marlow-windowrepair/ has plenty of experience in converting older window mechanisms into modern ones. This can save you money by replacing the entire window. Call or email us today for more information or a no-cost quote.
Warping
Double-glazed windows are usually the best option for saving energy in your home. They consist of two panes that have a spacer, or dense gas between them. This creates a seal that keeps cold air out and warm air inside. In time, however windows can become damaged or break and require repair. Most repairs can be done without the need to replace the entire window.
A common issue that double-glazed windows face is warping. This happens when windows start to bow, bend or twist, which can alter the structural integrity of the window and its ability to insulate. The best way to avoid this issue is to make sure that double-glazed windows are installed correctly and maintained regularly.
img width="366" src="
">
Contact a professional immediately if you notice that your double-glazed windows are warping. This will help to keep the issue from getting worse. They will be able to inspect your windows and identify the root cause of the warping. They will make use of special tools to fix your issue and make sure that your windows are sealed properly.
A common cause for this issue is water vapour between the windows, which can get accumulated over time. This could be due to a variety of elements, such as weather conditions, humidity levels and temperature changes. To remedy this, the specialist will drill a small hole through the window to let out the moisture. They will then use a cleaning agent to clean the glass and apply a sealant to help keep it dry in the future.
Alternatively, if your windows aren't able to be opened or closed, this may be a sign of a problem with the mechanism or hinges. Before calling a professional to fix the problem, it is worthwhile to grease the parts. This will usually resolve the issue and reduce the need for replacements. If your windows are worn out or don't offer the insulation you desire it might be better to replace them.
![[PukiWiki]](image/pukiwiki.png "[PukiWiki]")
