How to Replace a Nissan Juke Spare Key
Nissan Juke is an attractive and enjoyable hatchback with an unusual engine configuration. It's not the most quiet, but still fun to drive.
Replace the battery in the key fob of your Nissan Juke every two years, or when it's low. You can do it yourself, but you'll require some tools.
img width="420" src="
">
Dead Coin Battery
If your Nissan Juke key fob has stopped working, the first thing to check is the coin battery within it. It could be dead and requires to be replaced. This is a quick fix that will take only some minutes. It's as easy as flipping the fob and accessing the tiny latch/release at the back. Replace the battery that was in use and ensure it's facing down on the fob. Place the two halves carefully.
If the fob has been exposed to water, it will need to be cleaned prior placing the new battery into. This can be done using a paper towel along with isopropyl alcohol or electronic cleaner, and allow it to dry completely prior to re-inserting the battery.
The key fob has to be connected to the car in order to be able to start the car. This can be done by following the instructions in the owner's manual, or an OBDII scanner. If the key fob hasn't been linked, it is the most likely reason of why it isn't working. It could also be that the fob has an issue with the chip, but this is extremely rare. A new receiver module may be required in this scenario. If this is the case, it will need to be replaced by an accredited technician.
https://www.thekeylab.co.uk/nissan-car-keys/ Damage
The key fob is battery operated, and these batteries require replacement every two years or as often, or at the first sign of your car not responding when you hit the "start" button. The rubber seals on keys are designed to keep out water, however submerging the key fob in the pool or ocean can damage the electronic chip. If this is the case, you'll need to get an alternate key from Nissan or a locksmith.
It's possible that the computer has lost connection with the key fob This could result from a variety of reasons. A simple restart of the car will resolve this issue, but in the event that the key is showing the "Key ID" error message, you'll need contact Nissan or an auto locksmith to get help.
The three most frequent reasons for this problem are dead batteries on key fobs, a non-programmed key, and a damaged or defective key fob. The first two are relatively easy to fix, and the third one is more difficult to fix immediately, but it can be fixed with a bit of perseverance. Compare Nissan Key Replacement prices near you with WhoCanFixMyCar? and schedule your repair online. You can read customer reviews about local Nissan dealerships, Nissan mechanics, and garages in only a few seconds.
Faulty Chip
The key fob of your Nissan Juke contains a special chip that sends a message to the vehicle each time you turn it. If that chip is faulty, it can cause the key to stop working. In this instance it is possible to fix the problem by replacing the key. There are a myriad of reasons your Nissan Juke's key could be defective, including water damage or a dead battery for your coin or a damaged receiver module.
If your key fob stops working after an immersion in the wash or bath, you need to check the chip for water damage. Check that the retainers are in good shape and the chip isn't exposed to any water. If you observe any signs of water damage on the electronic component, remove the battery and wipe it down with isopropyl-ethanol or electronic cleaner.
If the chip is damaged If the chip is defective, you must visit your local locksmith shop or dealership. To find a replacement chip, they will require the year, make and model of your car. You will also have to record your VIN (Vehicle ID Number) so that the dealer or locksmith can know exactly which key you have. This will allow them to find the correct key code and make sure that they are cutting the correct key.
Faulty Receiver Module
The fob's key sends a radio signal to your vehicle to perform various functions. It can unlock the trunk while you rush to the car with groceries or start your car by pressing the button on the fob. It can also open your windows and turn on the horn in the event you lock your keys in your car.
If the key fob doesn't function, it could be due to a problem in the receiver module. The receiver modules are tuned so that they can pick up specific frequencies which correspond to the signals that are transmitted by Nissan key fobs. If your car is equipped with a faulty receiver module is damaged, it will cease to respond to any signal from the key fob.
It's a good idea to have a spare Nissan key fob in case your original key gets lost or breaks. A spare key can be programmed by a locksmith or dealership to work with your Nissan and will help you avoid the difficulty of locking your keys inside your vehicle or losing them.
If your Nissan Juke key fob has been exposed to clean water from the tap or rain the issue can be solved by cleaning it using isopropyl alcohol or an electronic cleaner. If the chip has fried, you will need to purchase the new keyfob, which can be programmed to your car by a locksmith or dealer.
![[PukiWiki]](image/pukiwiki.png "[PukiWiki]")
