Double Glazed Window Repair
It's worth looking over the warranty included with most double-glazed windows. It generally covers any problems with the window hardware - hinges and locking mechanisms within the first 10 years.
A leak in the seal is typically the reason for mist appearing between your glass windows. This should be repaired immediately to avoid mold or damp growing in your home.
Condensation Between the Windows
If condensation forms between windows in your home, it's an indication that the seal that holds the gas that is used to insulate between the panes has failed. This is a serious issue that should be addressed immediately, especially during winter when the humidity levels are at their highest. This can also cause damage to sills, sealant and mould.
Ideally double-glazed windows should not be able to experience condensation between the panes. This could be caused by high humidity or a very cold snap. Fortunately, this is usually repaired without replacing the entire window. A professional can drill tiny holes into the glass and spray the inside of the window with a special cleaning solution. The moisture is then sucked out of the window and an anti-fogger system can be installed to stop any further buildup of moisture in the future.
Condensation can also happen between windows due to air leakage, or other factors outside the window. In this case it could take longer for moisture in the window to build up because the air must be sufficiently warm to evaporate the water molecules. In these cases it is recommended to replace the double glazed windows rather than trying to repair the existing sealed units.
img width="381" src="
">
A double-glazed glass window is comprised of two or more pieces of insulated tempered glass that are held together by a metal framework. The space between the windows is filled with an insulating gas like argon or Krypton and then sealed. The seal is responsible for stopping the gas used to insulate from escaping, and it also stops moisture and air from entering into the gap.
As windows get older, the seals get worse and allow moisture to enter the gaps between the glass panes. If the seals begin to leak, it is important to be aware of this since it means that the double glazing no longer performs as well as before. This could result in a decrease in energy efficiency, increased heating bills, property damage, and the risk of condensation developing between the windows.
Mist
If you notice condensation on the outside of your windows this is perfectly normal and means that your double glazing is in good working order and retaining the heat in your home. The condensation is caused by the outside air is hotter than the glass, and it reaches the dew point of the window earlier than the air inside. This is one of the major advantages of having high-quality double glazing.
If the condensation is on the inside of your window then it could be a sign of a ventilation problem in your home. The excess moisture won't go anywhere else and ends in the carpet, window, furniture, and other areas of your home. It is possible to prevent this by having it inspected by a professional and making sure that there is plenty of fresh air in your home.
Another reason why you may have mist on your double-glazed window is that the seal between the two panes is breaking down. This can be due to wear and tear or chemical cleaning products being used. If this happens, the best option is to have the windows repaired in the shortest time possible.
Having your windows professionally repaired will ensure they remain dry and free of fogging, condensation and misting. It's also less expensive than replacing them entirely and will also save you money on your energy costs.
A registered window installer with FENSA will provide you with a cost estimate to repair or replace your double glazed Windows. If your existing windows are old and have been in use for a while you may want to consider upgrading them to new A-rated energy efficient ones.
It is recommended to keep copies of any warranties and agreements with the window installers. It can be helpful in the event that you experience any problems with your windows. Contact your window fitters and resolve the issue. This is a better choice than ignoring the problem and causing further problems in your home.
Difficulty to Open or Close
When double glazed windows are difficult to open and close, it's not just a nuisance and can result in increased energy bills due to the loss of heat and draughts. It can also be a security problem, particularly when the locks aren't functioning properly. You should fix any double-glazed doors and windows as soon as you can.
If you are unable to open your window and have tried the simplest solution such as using a screwdriver to pry it open, or tapping the frame with a tough object, the issue could be more serious. The window may have shifted and needs to be reset or there could be a gap between the glass and frames. In either case, you should seek out a professional double glazing repair expert to make sure that the proper repairs are done and to prevent future problems.
It isn't common for UPVC window handles and lock mechanisms to get stuck or unusable particularly when they're old and worn. This is usually due to a build-up of grease or dirt in the handle. This can be easily solved by cleaning it with a uPVC cleanser. If this doesn't work, you can try gently tapping the uPVC frame with a hard object such as a screwdriver, taking care not to harm the handle or the window handle mechanism.
If this doesn't solve the problem then the window may need to be replaced as it is likely that the hinges are no longer in the correct position, or the locking mechanisms are damaged. In this case you should speak to an UPVC window specialist.
David The Window Wizard specialises in all technical aspects of double-glazed repair of doors and windows, including fixing a jammed or shut double glazing window. He has plenty of experience in converting older window mechanisms into modern. This could save you money by replacing the entire window. For more information or to request an estimate, call or email today.
Warping
Double-glazed windows are typically the best option for saving energy in your home. They are made up of two distinct panes that have a spacer, air or a dense gas between the panes. This creates an airtight seal that keeps cold air out and warm air in. However, over time, these windows may become damaged or break and require repair. Most of these repairs can be done without replacing the entire window.
Warping is a frequent issue with double-glazed windows. https://www.repairmywindowsanddoors.co.uk/birmingham-windowrepair/ begin to bow or twist, or bow. This can affect the structural integrity and insulation abilities of the window. The best way to prevent this problem is to make sure that your double-glazed windows are properly installed and maintained regularly.
Contact a professional when you notice that your double-glazed windows are sagging. This will help keep the issue from getting worse. They will be able to inspect your windows and identify the reason for the warping. They will then utilize special tools to fix the issue and make sure that your windows are sealed again.
Water vapour is a cause of this issue because it may build up between windows over time. This can be caused by many factors, such as the weather as well as humidity levels and temperature variations. To resolve this issue the expert will make a small hole in the glass to let out the moisture. The specialist will apply a cleaner on the glass to clean it, and then apply a sealant.
If windows aren't able opened or closed, this may be a sign of a problem with the mechanism or hinges. It is worth trying to grease these areas of the window prior to calling a professional as this can often solve the issue and decrease the need for replacements. However, if your windows are quite old or are not providing the insulation you'd like to have, it is often better to replace them.
![[PukiWiki]](image/pukiwiki.png "[PukiWiki]")
