How to Add, Change, and Reprogram a Mazda 3 Spare Key
It's a good idea to have an extra key at hand, whether you dropped your keyfob, or it has stopped working. This article will show you how to add, change and re-programme your Mazda 3 keyfobs.
A word of warning: some keys require programming by a professional locksmith or dealer, while others don't. Make sure to use official Mazda replacements for your key fob.
How do I add a spare key?
You can also add a second key if you don't have a spare key, or if you accidentally break your current one. To accomplish this, you'll require a small screwdriver with a flat head and a new CR2025 battery. Once you have these items, it's time to remove the key fob to change the battery. Locate the key release auxiliary. It's located on the underside of the metal portion. It's easy to find. When you hit the button, the cover should be removed immediately. Then, put the screwdriver's tip into the notch at the top or the space, and pull the metal piece off.
Insert the spare or new key into the slot after removing the secondary key. Set the ignition to ON, and wait for about five seconds before turning it to OFF. This will allow the system to recognize the new key and begin your vehicle in the future.
It's important to note that you can only program up to three keys for your Mazda 3. The most important thing is to have more than two functioning key fobs and not being able to get your car started. This is a precautionary measure to prevent unauthorized users from activating your keys and starting your vehicle.
How do I reprogram a spare key?
If you have a spare key it's best to know how to reprogram it in the event that the original key you had is lost or stolen. This will keep unauthorized people from stealing your car and starting it. This process should work on any Mazda but you'll need two keys that work to begin the reprogramming. If you don't have two working keys, you'll need take your vehicle to the dealer to get it done.
Start by stepping into driver's position, and close all the doors with the exception of the one that is open. Turn the ignition on and insert the first working key. Take five seconds before removing the key. Repeat the process with the second key.
After you've programmed your new key, you should have three working keys you can use to start your car in the future. Check each key to make sure they're working correctly before taking them off.
It's a good idea to purchase a spare Mazda 3 key fob, particularly if you're a driver who often loses your key or has other issues with it. It's possible to find one on the internet or at your local automobile retailer, but make sure to read reviews before purchasing so that you can avoid purchasing one that's not compatible with your vehicle.
How to Change the Battery on a spare Key
It's awful to discover that the key fob you used to use has gone out, and you are in a position to not unlock your vehicle. https://www.thekeylab.co.uk/mazda-car-keys/ to replace the battery yourself and save money at the dealer.
The first step is to press the auxiliary key button on the back of the key fob. This will detach the key made of metal and reveal two slots on the opposite side of the case. Put the flathead screwdriver in one of these slots, and gently take apart the two parts of the case. Once the battery is fully exposed, take it out and place it in a safe place somewhere you won't forget it.
Be sure to bring a new battery ready before you start. These batteries can be purchased from any store that sells batteries or from a Mazda dealer in Winter Garden. The right type of battery is crucial to ensure that your keyfob is working properly.
Replace the cap of the battery and then install the new battery. Be careful not to scratch the small rubber ring the battery is placed on. Press the two halves together until you hear the click.
How to Reset the Keyless Entry System
img width="381" src="
">
The key fob that you have in your Mazda 3 is not only an added convenience, but it's also an important security feature. The car won't start if the key is stolen or lost even if you have an extra fob. The key fob has to be reprogrammed by a dealer to enable it to function again. This could be a costly and time-consuming process It's a good idea to understand how to reset the system yourself.
To reset the system, disconnect the battery for 15 minutes. This will eliminate any residual power from the on-board computer. The next step is to disconnect the LF-ECU and demand switch connectors. After that, test for continuity between the following terminals:
Place the key in the slot, then switch the ignition on. Put the key in for about five seconds and then turn off. The key's information will be added to the vehicle's computer and the new fob will be able start your vehicle in the future. You can program as many fobs as desire but only one can be utilized at any given time. This will prevent unauthorized persons from copying your key and getting ahold of your vehicle. You can purchase a new key fob online, but you'll still need to visit an authorized locksmith or dealer to cut it and programmed.
![[PukiWiki]](image/pukiwiki.png "[PukiWiki]")
