Peugeot 3008 Key Fob Problems
Peugeot's mid-sized 3008 SUV has a lot going for it. It's smooth to drive, looks good and has a large boot. But is it able to beat against strong competition in the most crowded area of the market?
If your Peugeot key fob is not working, it may have been exposed to clean tap water or soapy water. It is possible to remove the battery and clean it with isopropyl ethanol or electronic cleaner.
Dead coin battery
Peugeot key fobs are equipped with a small coin battery that powers their remote locking and other functions. The battery is a bit dated and is susceptible to wear after a long period of use. The test of voltage is a quick way to determine if the battery is defective. A multimeter is used to measure the voltage that is between the battery's plus and negative poles. This test can determine if the battery is dead.
The receiver module could be the reason behind your key fobs failing to function after having used your Peugeot 3008 for a long period of time. The receiver module is responsible for receiving radio frequency signals received by the key fobs, and transmitting them to car systems. If the receiver module is defective and not functioning properly, it won't be able to send commands to other modules of the vehicle.
Another common reason for a key fob that is not working is moisture or sweat in the circuit board. This can cause short circuits that drain the battery, and disable the remote locking feature of the key fob. If this happens, you should bring your key fob in to a technician who is skilled in chip level repairs.
Water damage
Whether you dropped your key fob in the pool, tossed it in the washing machine or even left it in the rain for too long, water damage could cause a lot of problems. Water is a fantastic conductor, and can easily cut off parts of the circuit board. It can also cause corrosion to the metal traces as well as other components on the key fob. A damaged circuit board could also cause the battery lose its charge.
If you have a spare key fob, use it to lock or unlock your Peugeot 3008 to rule out the possibility that a dead coin battery is the root of the problem. Interference signals can also cause your key fob not to function properly. They interfere with the signal sent by the receiver module. These interference signals are caused by many sources which include radio transmitters located in the vicinity.
If you hear sloshing noises emanating from your Peugeot 3008 while driving, this is likely due to a clogged condensate drain for the evaporator. You can test this by blowing compressed air through the drain holes under your door. You can also use flexible metal wire to move drain holes around to clean any dirt that has built up. The sound of sloshing could also indicate that there are air pockets in the cooling system.
The receiver module is not working properly.
The receiver module of the receiver module of a Peugeot 3008 is responsible for transmitting an electronic remote keyless signal from the keyfob to a receiver in the car. If this module is damaged, it may cause the car to not recognize the key fob. Other factors that can trigger this issue include an unresponsive battery or water damage, as well as interference with electronic devices that operate at the same frequency the key fob. In these situations, the car may show a message saying "card not detected" on the display.
There are a variety of options to solve this issue. Try replacing the battery or reprogram the key fob. You can also start the car using a spare key. If the key fob still isn't working after completing all these steps, then it might be due to a malfunctioning chip.
img width="402" src="
">
The best way to know whether the key fob has a malfunctioning chip is to take it out and clean it up with a paper towel and rubbing alcohol. If the chip is fried you need to purchase an entirely new one. FB Series enclosures are designed to fit a key fob and come with an optional coin battery holder that can fit the most popular type of key fob batteries. They can also be personalized with digital printing and CNC cutouts that are machined. If your key fob was exposed to salty or dirty tap water, it is possible that the chip is damaged.
A malfunctioning keyless entry system
If you receive the message "card not detected" this indicates that your car is unable to receive signals from your key fob. This can be due to a variety of causes, including the battery being weak or dead. In most cases, the issue will be fixed by pressing the start button with the key fob. In some cases, you'll need to take the keyfob to an Peugeot dealer for repairs.
The first step to resolve the issue with a Peugeot 3008 key fob that isn't able to unlock or lock the doors is to test its battery. Batteries are the primary cause of a malfunctioning fob, but there are other causes that can contribute to this issue too. They include worn buttons, damage to the receiver module, water problems, and signal interference.
If you've recently had your Peugeot key fob exposed to clean tap water it's a good idea to remove the battery and dry the electronic components using paper towel. https://www.thekeylab.co.uk/peugeot-car-keys/ can also employ a cleaner or isopropyl ethanol for this. It's best to change the fob when it has been exposed to salt water or soapy water.
If your key fob is still not working, try to reset it by disconnecting the battery that is 12 volts for approximately 15 minutes. Connect the negative cable and then the positive cable.
![[PukiWiki]](image/pukiwiki.png "[PukiWiki]")
