Peugeot 308 Key Fob Problems and How to Fix Them
If your Peugeot key fob suddenly stopped functioning it could be because of an unresponsive battery in the coin-cell, water damage, receiver modules issues, or a defective chip. Fortunately, these issues are easy to fix and you'll have your vehicle back to normal in no time at all!
Car keys can also become faulty due to the fact that the blade on the key gets worn. It is easy to fix to fix the problem if you go to your local Car Key Man Auto Locksmith and let them install a new key blade for you.
https://www.thekeylab.co.uk/peugeot-car-keys/ of your Peugeot 308 may die or become weak enough to not send a clear signal. This could cause the key fob to stop working, preventing you from locking or opening the doors or even starting your engine. You'll need a new battery for the key fob in order to fix this.
You can buy a brand new battery at an auto parts store or at your local hardware store. Make sure the battery is brand new and has not sitting on the counter for too long. A brand new battery has more capacity and will transmit a stronger signal your car.
After replacing the battery, try unlocking and locking the doors of your Peugeot using the key fob. If the doors don't unlock it is most likely in the car's receiver module, which can be reprogrammed by your local Peugeot dealer.
It's possible that the key fob's internal chip is damaged. You can cause damage to your key fob if you drop it on the ground, or expose it to moisture. Rubber seals that protect your chip from moisture can be worn out over time. This is especially the case when you expose your key fob to water for long periods of time, such as swimming it in the ocean. To avoid this occurring, it's crucial to keep your key fob away from water and never let it come into contact with water.
Water Damage
If your key fob is submerged, whether you dropped it in the pool or threw it into a puddle, don't think it's a case of lost cause. The key fob is protected by rubber seals, however, prolonged exposure to water could harm its electronic chip. Water is a great conductor and any water that gets inside the key fob will trigger short circuits in series that eventually destroy the electronic chip. After taking the battery out, scrub the contacts with isopropyl alcohol and dry it off completely before putting it back in.
img width="431" src="
">
Your Peugeot 308 may not start because of an unresponsive battery. Jumper cables are a fantastic option to restart the engine when you have an additional car. If you suspect that the battery is at fault then it must be replaced.
Another reason could be an ineffective receiver in the vehicle that could block the signal from the key fob. It could be a issue with the antenna or wiring, or the key fob may be damaged. If you are using a new key fob, it may need to be programmed to your vehicle. If you are unable solve the issue, you should contact a professional technician. A skilled technician will be able to identify the issue quickly and fix it immediately.
Radio Interference
Interference may cause symptoms such as a key fob that is not recognized or has a limited range. The interference can be transmitted or radiated, the latter being caused by power and speaker cables that are too close to electrical parts. Generally, rerouting the cables or moving them away from the components can solve the issue.
It's unlikely someone is listening to the key fob's signal in the intention of stealing your vehicle or vehicle, but it's possible that radio interference has drowned out the signal. Fortunately, this is not a problem to repair.
If your key fob isn't being recognized by the system, try a new battery. Make sure that the battery is of the correct size and type. A wrongly sized battery can cause damage to the fob.
These devices can interfere with the key signal if they are using the same radio frequency. Avoid attaching these devices to your key fob.
Pairing Issues
The remote keyless entry system of automobiles has a receiver that receives radio frequencies from the key fob. If this receiver develops a problem, you won't be in a position to start your car, even if the key fob works and is changed. The issue could result from a variety of things, including the battery of a coin that is dead and water damage. The receiver may be malfunctioning because of a software error or internal damage to the key itself.
The battery that powers your Peugeot 308 keyfob has likely gone out of service. You can replace it by using a fresh battery, but it's essential to select the correct battery for your key fob. If you use a battery that is not correct, it could lead to further problems with the key fob, so it is best to choose the original or an alternative that is similar in size, voltage and specification.
Your Peugeot 308 keyfob may not work if it has been paired with a different vehicle. You could have accidentally handed your key fob away to a friend or it was used to unlock other vehicles. This can be resolved by reprogramming the fob using an OBDII scanner. This tool will ask for information about your car, like its VIN or engine type. It is crucial to enter the correct information.
![[PukiWiki]](image/pukiwiki.png "[PukiWiki]")
