Peugeot 308 Key Fob Problems and How to Fix Them
If your Peugeot key fob suddenly stopped functioning it could be because of a dead coin-cell battery or water damage, receiver modules issues, or a defective chip. Fortunately, all of these are simple to fix and you'll be able to get your vehicle back to normal in no time!
Car keys can also get damaged because the blade of the key gets worn. This is a simple fix to fix the problem if you go to your local Car Key Man Auto Locksmith and let them fit the new blade for you.
Battery
The battery that powers the key fob on your Peugeot 308 can sometimes die or become weak enough to send a strong signal to the car. This could cause the key fob to stop working and prevent you from opening and locking the doors or starting your engine. You'll need a new battery for your key fob to correct this.
You can purchase a new battery at an auto parts shop, or at your local hardware store. When https://www.thekeylab.co.uk/peugeot-car-keys/ purchase the battery, make sure that it's brand new and hasn't been sitting on the shelf for too long. A brand new battery is more capacity and will send a stronger signal your car.
After replacing the battery try unlocking the doors and locking them using the key fob. If the doors aren't unlocking it is most likely to be in the receiver module of the car which can be changed by your local Peugeot dealer.
It's possible that the key fob's internal chip has been damaged. This can happen if you drop your key fob on the ground or expose it to water. Rubber seals that shield your chip from moisture could be worn out over time. This is particularly true when you expose your key fob to water for long periods of time, for example, swimming it in the ocean. To prevent this from happening, you should keep your key fob away of water and out of water.
Water Damage
If your key fob gets wet in water, whether you dropped it into the pool or threw it into a puddle, don't assume it's a lost cause. While the key fob has rubber seals which should shield it from water, long-term exposure to water may lead to damage to its electronic chip. Water is a good conductor, and any water that gets inside the key fob will trigger the short circuits to be in series which can eventually harm the electronic chip. After removing the batteries, clean its contacts with isopropyl and then dry them completely before putting them back into.
A dead battery could be the reason your Peugeot 308 won't start. If you have an extra vehicle, jumper cables may be used to get the engine running again. If the battery is damaged it is required to replace it.
Another reason could be a defective receiver inside the vehicle, which could stop it from receiving a signal from the key fob. It could be a issue with the antenna, or wiring or the key fob may be damaged. It might be necessary to program a new fob into your vehicle if using one. If you cannot fix the issue on your own seek out an expert technician. A skilled technician will be able diagnose the problem quickly and fix it promptly.
Radio Interference
Interference can trigger symptoms such as a key fob that isn't recognized or has a limited range. The interference can be transmitted or radiated the latter resulting from power cables and speaker cables being too close to electrical parts. Generally, re-routing the cables or moving them further away from the components can solve the issue.
It's unlikely someone is watching the key fob's signal in order to steal your car, but it's possible that radio interference has ruined the signal. This is a simple issue to solve.
If your key fob isn't being recognized by the system, try a new battery. Also, ensure that the battery is of the right size and type. Batteries that aren't the correct dimensions can harm your battery.
These devices could interfere with the key signal if they operate on the same radio frequency. Avoid connecting these devices to your key fob.
Pairing Issues
The remote keyless entry system that is used in the car is equipped with an antenna that receives radio frequencies from the key fob. If the receiver has developed problems, you won't be in a position to begin your vehicle even if your key fob functions and is modified. The issue can result from a variety of causes, including an inoperative coin battery or water damage. The receiver may also be malfunctioning due to a software error or internal damage to the key itself.
One of the most common reasons that your Peugeot 308 key fob isn't working is because the coin battery inside has died. This battery can be easily replaced, but you must make sure that it is the proper battery for your key fob. The wrong battery could cause more problems with the key fob, so it is best to choose the original battery or an equivalent replacement in size, voltage and specifications.
img width="484" src="
">
Your Peugeot 308 keyfob may not function if it was linked to an unrelated vehicle. You might have accidentally given your key fob away to a friend or it was used to unlock other vehicles. This can be resolved by reprogramming your key fob using an OBDII scan. This tool will usually ask you for specific information about the vehicle, such as the VIN or engine type, and it's crucial that you enter this correctly.
![[PukiWiki]](image/pukiwiki.png "[PukiWiki]")
