Peugeot 308 Key Fob Replacement
Peugeot's 308 might be catching on a little however it's still attractive. It might not be the most luxurious car in its class and it's a Ford Focus or Volkswagen Golf will help you stay away from sloping surfaces - but it's a relaxing and civilised driving experience.
Here at Coded Car Keys we are often asked to replace peugeot 308 key fobs. The following tips will assist whether the issue is intermittent, or constant.
Water Damage
If you leave your fob in the midst of a puddle or splash it with water when kayaking, swimming, canoeing, rafting, or canyoning, it's probably to sustain water damage. Keep your key fob in a dry bag every time you go outdoors or do things that expose it to excessive water.
You'll also want to make sure that the fob is completely dry prior to opening it and reusing it. If you notice any smells emanating from the fob (such as industrial liquid or windshield washer fluid) It's another indication that it's been submerged.
A circuit board that is wet could cause the battery to discharge its charge, or even explode. If you're able to fish your key fob 308 out of whatever body of water it was stuck in turn the button upside down and shake it out as much water as you can before opening the case. After opening it, take out the battery and wipe the circuit board with the help of a cotton swab that has been dipped in 90-percent isopropyl alcohol.
Other reasons why your Peugeot 308 remote keyless entry system might be unable to function could be due to an empty coin battery, receiver module issues, signal interference, or an electronic chip that is defective. If none of these are the reason it is possible to reset the system by removing the 12 volt battery from the car for 15 minutes.
Dead Coin Battery
Peugeot cars come with a remote start system that allows drivers to start their car from the distance, allowing them to warm up or cool down the vehicle before they get in. This feature is extremely useful particularly during the cold winter months. Remote start systems may not function due to a variety of reasons, such as the dead battery in the coin-battery.
A coin-shaped battery that is found inside the key fob has a life span of two to four years, based on how often it is utilized and where it was purchased. The date for use-by will be printed on the packaging or in the user's manual.
If the key fob has stopped working after exposure to water that is clean it is recommended to take the battery off, clean the chip using a paper towel and isopropyl alcohol, then dry it thoroughly before replacing it. In https://www.thekeylab.co.uk/peugeot-car-keys/ of exposure to soapy or salty water, the chip may be fried and you will need to replace the key fob in total.
If you're unsure whether the battery is damaged you can check its voltage with a multimeter that is connected to both the minus and plus terminals. If the voltage is lower than 12-13 volts then it is time to replace the battery. If you want to, you can try to reset the on-board computer by disconnecting the battery with 12 volts for a few minutes and reconnecting it in reverse order (positive cable first and then negative). The engine should start.
Faulty Receiver Module
If you don't see "Key Detected", it could be the receiver module malfunctioning. It's the component that transmits the signal when your key fob turns on. It also acts as an alarm, and stops the car from starting without the correct key.
This could be due to a range of factors including water damage or simply getting old. If your Peugeot 308 key fob has been exposed dirty tap water, for instance the chip that is located inside may be damaged. In this situation you'll need to remove it apart and thoroughly clean it with isopropyl alcohol, or electronic cleaner. Once the battery has dried you can try it again.
If the issue isn't resolved you're probably in need of a idea to visit a local Peugeot specialist or locksmith. They can employ an instrument for diagnosing to identify the issue and fix it.
Losing your Peugeot keys to your car is an extremely stressful experience. However, a reputable auto locksmith can fix the problem in minutes. They can program your vehicle and cut a brand new, working key for you. Click here to find a local locksmith near you.
Faulty electronic chip
The electronic chip inside your Peugeot 308 key fob is a very crucial component of the remote control system. If the chip is damaged, you could encounter issues starting your car or receive a message stating "anti-theft". If this occurs, the only solution to fix the issue is to get a new key. Fortunately, auto locksmiths with experience can provide the service within the shortest period of time.
The chip inside the chip of your Peugeot 308 key fob can become faulty due to sweat, water damage dirt, or other causes. If your Peugeot key fob has been exposed dirty or soapy water, it needs to be cleaned right away. You can use a paper towel and isopropyl ethanol to clean the electronic component. The battery should be allowed to dry completely.
Sometimes the key fob may stop working because of radio interference. This could be due to other devices operate on the same frequencies as your Peugeot keyfob. It could also be caused by weather conditions or objects around the vehicle. If you experience this problem it is advised to visit an Peugeot dealership.
The Peugeot Key Fob 207/308 is very delicate and requires special care. It is crucial not to drop or throw the key fob. If you lose it, try to find it as quickly as possible. You can reset all the on-board computers by disconnecting the 12 volt battery for a short period of time. Disconnect the negative cable before the positive.
img width="360" src="
">
![[PukiWiki]](image/pukiwiki.png "[PukiWiki]")
