Fiat 500 Replacement Key Fob
If your 500 remote key fob isn't working, it's time to replace the battery. If you do replace the battery and it does not work the issue is likely to be elsewhere.
United Locksmith specializes in the production of new keys for classic cars. We have all the tools and accessories needed for this service.
Dead Coin Battery
A dead battery is the most frequent cause of your Fiat 500 keyfob not locking or unlocking the doors. The key fob contains an in-built battery that is prone to draining quickly in the event that it is not utilized frequently enough. If your remote starts to show signs of a loss of range or has stopped functioning in the middle of the night, then your battery may be dead.
The battery inside the key fob is held in place with metal retaining clips. If the clips are loose they can cause contact issues, which could prevent the remote from receiving power. Use a flathead screwdriver to open the retaining clips and remove the battery. Be sure to choose a replacement battery with the same kind of voltage, size and specifications as the original battery.
Water exposure can also cause the key fob to become corroded or damaged. Even a quick bath in soapy, warm water could cause damage to the chip. Keep your key fob dry.
Water Damage
Water damage may be the reason behind your key fob's inability to function properly. The rubber seals on key fobs prevent them from getting damaged by a small splash or drizzle of water. However, it is crucial to keep the keys out of the washing machine, the ocean and pool.
The key fob is equipped with an electronic chip that transmits an immobilizer of your car. The chip is what allows the 500 to lock and start. If it gets wet, however it will not work.
If you're looking to determine if your key fob is functional it is possible to clean the internal electronics with isopropyl or an electronic cleaner. However, it is probably recommended to purchase a replacement from a dealer rather than trying to repair the key fob which has been submerged by salt water.
A replacement fob may cost you a bit however, it's cheaper than having to have your Fiat 500 towed to a dealer and repaired there! Additionally, you can do it yourself with the simplest of steps. Make sure you have the correct battery type before you attempt to open your keyfob. This task is more straightforward than it appears and you can find step-by-step directions online for nearly every key fob for cars.
Faulty Chip
The chip located within the key fob communicates with the car's immobiliser unit to ensure the car is capable of starting when the correct key is inserted. If the chip is damaged, or corrupted, your car won't start regardless of what you do.
img width="497" src="
">
A chip that is damaged can happen due to a variety of reasons, but the most common reason is water damage or a dead battery. It is best to delegate the job to a professional locksmith who will be able to replace the chip quickly and at an affordable cost.
If your key fob does not function after exposure to water that is clean from the tap or rain take the battery off. Wipe down the electronic component with a paper towel. If the key fob does not function, there's the possibility that it has damaged components and requires to be replaced.
A few people will visit their dealer in order to get an entirely new Fiat fob. But, this can be a costly option. If you're seeking a cost-effective method to get your Fiat key fob repaired, look no further than United Locksmith. We have all the tools and knowledge required to fix your Fiat fob quickly and professionally. way.
Faulty Receiver Module
Fiat key fobs send an electrical signal to the vehicle that can unlock and close doors (and start the car for those with an automatic transmission) up to 50 feet. However there are some things that could cause the fob to stop functioning. This can be caused by a dead coin-battery water damage, worn out buttons or a receiver issue signal interference, or a malfunctioning chip.
If the fob is in the pocket that has been subject to severe trauma (such as being dropped on a hard floor or being washed in a washing machine) the fob might not be in a position to communicate with the Body Control Module (BCM) of the vehicle. This is because the BCM is an extremely secure system that will only accept a signal from a genuine key, and not from any other.
You'll need to replace the fob in case this happens. https://www.g28carkeys.co.uk/fiat-car-key-replacements-near-me/ can handle every aspect of the replacement procedure as well as programming a new one for your 500. In fact, they'll provide you with a replica key that works just the same way as the original fob (and costs only a fraction of the price).
![[PukiWiki]](image/pukiwiki.png "[PukiWiki]")
