How to Add, Change, and Reprogram a Mazda 3 Spare Key
img width="303" src="
">
It's a good idea to keep a spare key on hand no matter if you've dropped the keyfob you were using or it was unable to function. This article will go over everything you must know about adding, changing, and reprogramming your Mazda 3 key fobs.
Warning: Some keys require programming from a professional locksmith, while others don't. Be sure to only use genuine Mazda replacements for your key fob.
How to add a spare key
If you're not fortunate enough to get a spare key from the dealership when you purchase your Mazda 3 or accidentally break your current one, don't worry -- there is still the option of adding another key. To accomplish this, you'll require a small screwdriver with a flat head and a new CR2025 battery. Once you've got all the equipment and tools, you're ready to open the key fob. Find the key release auxiliary. The button is on the bottom of the metal portion. It's easy to locate. The cover that covers the back should come off the moment you press the button. Then, you can insert the head of the screwdriver into the notch, or the spacing at the top of the metal component and pull it off.
After the auxiliary key has been removed, insert your new or spare key into the slot. Turn the ignition on and wait for approximately five seconds before turning it to OFF. This will allow the system to recognize the new key and begin your vehicle in the future.
You can only program three keys to your Mazda 3. The final thing you want is to have more than two working key fobs and not being capable of getting your vehicle started. https://www.thekeylab.co.uk/mazda-car-keys/ is a safeguard to stop unauthorized users from activating your keys and launching your car.
How to Reprogram a spare key
If you have a spare key, it's important to know how to reprogram it in the event that your original key is lost or stolen. This will keep unauthorised persons from starting your car, or taking it. This should work with any Mazda. You'll require two keys that work to start the reprogramming process. If you don't have two functioning keys, you'll need to bring your car to the dealership to get it done.
Start by stepping into driver's position, and closing all the doors except the one that is open. Insert the first working key in the slot, then set the ignition to the ON position. Then wait five seconds before taking out the key. Repeat with the second key.
After programming your new key you should have three keys that be able to start your car in the near future. Before you store each key, make sure it's working properly.
It's a good idea purchase an extra Mazda 3 key fob, especially if you're a driver who often loses your key or has other issues with it. It's possible to find one on the internet or at your local automotive retailer, but make sure to read the reviews before purchasing so that you can avoid getting an item that isn't compatible with your car.
How to change the Battery on a spare key
It's awful to discover that the key fob you used to use has gone out and you're locked out of your car. It's easy to replace the battery yourself and save money at the dealership.
The first step is to press the auxiliary key button located on the back of the key fob. This will take out the metal key and reveal two slots on the opposite side of the case. Place the flathead in one of these slots and then gently pry the two halves of the case apart. Once the battery is fully exposed, remove the case and place it in a place where you won't forget about it.
Before you start, make sure you have a new replacement battery. They can be found at any store that stocks batteries or at an Mazda dealer near Winter Garden. Using the correct type of battery will ensure that your key fob functions properly.
Replace the cap on the battery, and then insert the new battery. Be careful not to scratch the small rubber ring that the battery is placed on. The two halves should be pressed together until you hear a click.
How to reset a Keyless Entry System
The key fob on your Mazda 3 is not only an option for convenience, it's an important security feature. If you lose your key or have it stolen the car will not start even if you've got the spare key fob. This is because the key fob has to be reprogrammed by the dealership in order to work again. It's a difficult and costly experience. Therefore, it's best to learn how you can reset the system.
To reset the system, unplug the battery for around 15 minutes. This will eliminate any remaining electricity from the on-board computer. Then, disconnect the LF -ECU and demand switch connectors. Verify that the connections are in good order between the terminals.
To program a new key, or a spare, insert it into the slot and set the ignition to ON. The ignition should be turned off after about five minutes. The key's details will be added to your vehicle's computer and the new fob will be able start your car in the future. You can program as many fobs you want but only one can be used at a particular time. This will prevent unauthorized persons from copying your key and getting ahold of your vehicle. You can purchase a new key fob online, however you'll need to visit an authorized locksmith or dealer to cut it and programmed.
![[PukiWiki]](image/pukiwiki.png "[PukiWiki]")
