uPVC Window Repair
While uPVC windows are hardy and resistant to harsh weather conditions they may still have issues that need fixing. Luckily these problems can be repaired easily at only a fraction of the cost of replacing a window.
A common problem is that windows become difficult to open because the hinges are stiff. This can be solved by lubricating hinges using WD-40.
Cracked or Broken Glass
We have glass all over our homes; in doors, windows, surfaces and tables, on the front of microwaves and stoves and even in picture frames. A well-hit baseball or rough-housing with your friends can leave your windows with cracks which need to be fixed quickly before they become worse. Luckily, these types of cracks are very easy to repair without the need to replace your window glass or frame.
To begin, wipe the area with a damp cloth to get rid of any dust, dirt or fingerprints. Then, apply an amount of epoxy to close the area around the crack. Allow the epoxy to completely dry before moving your window. This is a very simple repair that will help you save the expense of replacing your uPVC windows.
Another issue that is common to uPVC windows is that the gasket on the window becoming soft or detached from the frame. This will result in a loss of insulation and opening for water or cold air into your home. This can be easily fixed by using the flat blade of an ATM card to cut the gasket from the window frame. If you have the time, you can also add a bit of epoxy to the crack, so that it appears as if it has never existed.
img width="333" src="
">
Use a piece of tape if the crack is too deep to reach with your fingertips. This will prevent further damage. Alternately, you can apply clear nail polish to fill in the crack and prevent it from getting any bigger. The key is to start this process when you first discover the crack, as it will quickly spread and become more difficult to repair.
If you are looking for a more permanent fix, use uPVC epoxy. This is the longest and most time consuming of all the options, but it will yield the most efficient results in terms strength and appearance. Follow the directions of the manufacturer for applying the epoxy. Once it has dried, apply a rag soaked in acetone to smooth the surface.
Water Leaks
uPVC windows are long-lasting, but they require some attention and maintenance. They can lead to a range of problems if they are not maintained properly. https://www.repairmywindowsanddoors.co.uk/macclesfield-windowrepair/ can range from water leaking around the frame, to condensation within the glass units.
A uPVC window specialist can help pinpoint the issue and fix it. They can also give advice on how to avoid it happening again in the future.
Leaking uPVC windows can be a significant problem and it is crucial to fix them as soon as is possible. If the damage is not taken care of, it could lead to major damp problems within your home. This can lead to expensive repairs as well as a reduction in energy efficiency.
In most instances, a leaky uPVC window can be fixed by a simple leak patch. The sealant is placed inside the window to prevent water from entering the house through the damaged area.
Cloudy or misty double glazed units are a sign that the seal between the glass panes has failed. This could be caused by a variety of reasons, such as wear and tear, age weather conditions, or simply age.
You can avoid this by having your windows regularly cleaned. It is recommended to clean your windows at least twice every year with an uncolored soft cloth that is soaked in warm soapy water. Avoid using colored cloths because they can leave dye stains. Solvent PVC cleaner is the most effective method to get rid of stubborn stains. It is available at any hardware store and is easy to apply. Remember to wipe the window frames in a shaded location away from direct sunlight in order to avoid any streaking.
Incorrectly installed hinges or locks
Over time, the window hinge may become bent or damaged. This can lead to a gap forming in the frame, which can allow draughts in and reduce energy efficiency. A draught will also make your home feel cold and uncomfortable and will increase your heating bills.
A gap in a uPVC window is an issue which can be addressed easily. A uPVC specialist will be able determine the issue and fix it for you. Usually, a small hole can be repaired using carpenter's glue and a wooden dowel inserted into the gap. The dowel should be placed so that it is in line with the hinge leaf and has smooth surfaces. Then the carpenter's glue should be spread on the dowel's wood surface and then tapped into the position. Once it has dried it is possible to screw driven in to fix the hinge.
UPVC window hinges or locks may become stiff over time because of wear and tear, or due to blockages created by dirt or debris. They should be examined regularly and cleaned to ensure that they function properly. A lubricant, such as WD-40 is recommended to keep the moving parts in good working order.
It is recommended that UPVC windows are cleaned at least twice per year. This should be done using a damp cloth that has been dipped in an emulsion of mild soap and water. The areas around the corners of the window should be cleaned more frequently to prevent the accumulation of dirt and rust.
The handle of a uPVC window can also become stiff when opening or close. This could be because of the handle being thrown off or it can be caused by problems with the locking system. It is usually a quick and easy fix and can be done by the homeowner themselves by following some simple steps.
A faulty lock is a security risk, as it could make your home vulnerable to intruders. A faulty lock may also make it difficult to open your uPVC window or door, which can be a inconvenience for you. A new handle or re-alignment of the multipoint locking mechanism might be required if this is the case.
Stuck Handle
It is quite annoying when your upvc window handle becomes stuck, especially when you try to open the window, but it requires lots of force or doesn't open at all. This is usually caused by an electrical wire that is inside the handle holder and has become rough. You can usually fix the problem by simply removing the handle to inspect the wire.
You can also fix this problem by using graphite or paraffin on the pole sliders. This will allow the handle move up and down. It is also a good time to clean your handle since this will help prevent any further issues.
Superglue can be used to repair the button in the event that the issue is actually the push button. Superglue should be completely dry before applying it to the next. If the handle is damaged or broken it can be fixed by ordering a replacement and screwing it in the right place. This is a far simpler repair than replacing the entire window frame, and is something you can do yourself, particularly if have access to the right tools.
![[PukiWiki]](image/pukiwiki.png "[PukiWiki]")
