Mini Cooper Key Fob Replacement
img width="387" src="
">
It is recommended to purchase keys from the dealer if you're in the need of one. They are usually cheaper than the non-branded ones and offer a range of features, such as the ability to open and close your windows.
You can also find them online but they may not work with your car. They have to be programmed to match your car, which may take time and cost money.
Cost
A lot of newer cars come with a remote control key fob, which allows the driver to unlock the car and start it. These key fobs could be costly to replace if lost or damaged. In some instances, you might need to replace the entire key fob. You can order a replacement key fob from the dealer or online retailer.
You can also replace your key at an auto parts shop or a locksmith, depending on the model. It is important to know that these key fobs come with an integrated chip which communicates with the car's system. https://www.thekeylab.co.uk/mini-car-keys/ means that if you get a generic key fob, it won't function properly in your Mini Cooper.
You can buy the replacement mini cooper key from a dealer for $150 when you have a Gen 1 or 2. Locksmiths can replace your key for less than that however it is recommended to have a spare. You can also order a standard key that is not remote, which is priced at $60, and will lock and start your vehicle.
As a BMW and Mini Cooper service centre, GMW Perth is fully equipped to replace your BMW or Mini Cooper keys with genuine parts. It's not easy to lose your key however, by replacing it, you will ensure that your car will not be lost and end in the wrong hands.
Requirements
If you're considering replacing the key fob you have, ensure you purchase one that is compatible with your vehicle. This is important because the key fob controls several functions, including opening and shutting down your car. Certain vehicles also require a certain size fob in order to perform their functions. If your new fob is the wrong size, it will not fit in the ignition and could cause problems.
In general the key fobs you purchase at MINI dealerships are compatible with your vehicle. They are also less expensive than the ones you buy from locksmiths. If you're not sure of installing a brand new key fob, you should leave the job to professionals.
The replacement of batteries is a regular requirement. This is not difficult. The first step is to remove the battery inside the case. To pull the notch on the top of the case you'll need a thin object. After taking the battery out, replace it with a CR 2032. These batteries can be purchased at your local hardware or supermarket.
The next step is activating the key fob replacement. This will allow the microchip to be connected with your vehicle. If you're not comfortable doing this, you could bring your vehicle to the nearest MINI dealer. You could also ask your local mechanic to do the same.
Compatibility
The key fob is a small plastic device that lets you to lock and unlock your car. It sends a radio-frequency signal to the receiver of the vehicle that triggers a chime to inform you if the doors are locked or not. Many modern cars come with this feature, and it can make driving safer and more convenient. If your key fob gets damaged, you'll require replacement.
Key fobs are susceptible to damage due to a variety causes. If they're dropped, stepped on or even soaked, they can stop working properly. This could result in doors not locking or unlocking properly. The buttons on the fob's key can also become misaligned and sticky after regular use.
You can use a spare keyfob that you can give to your spouse or to a different driver of the vehicle. This will allow each driver to have their own driver profile and prevent any misaligned settings like mirror position, climate control or the position of the seat.
A quality replacement key fob should have the same FCC ID number and component as the original. This will ensure that the new fob is compatible with your car's installed RKE system. A locksmith will also need to cut the fob to match the ignition of your vehicle. It must be "unlocked" (or "reflashed") to allow it to be programmed to the system in your vehicle installed.
Installation
Modern electronic keys offer an array of security and convenience features that you can't get from traditional mechanical keys. Key fobs, as with any other piece of equipment in a car, can malfunction occasionally. If this occurs, you'll need to contact a professional mobile locksmith.
Test your key fob to determine if it requires an upgrade to its battery. If the fob does not respond to pressing the lock or unlock button, it is most likely dead. The good news is that replacing the battery is a simple procedure. You can buy replacement batteries at hardware stores, on the internet, and at big-box retailers. You can also refer to your owner's manual (which you can usually find on the official website of the automaker) for specific instructions.
Remove the backup key made of metal from the fob. Set it aside in a secure place. Place the blade of a plastic pry tool or flathead screwdriver above the place where the key for ignition made of metal used to be. Take care to remove the cover on the back and place it in a secure location. Replace the battery with an CR2032 coin-cell. Make sure that the positive (+) side is facing towards you, and then pop the cover back in place.
![[PukiWiki]](image/pukiwiki.png "[PukiWiki]")
