Peugeot 308 Key Fob Problems and How to Fix Them
If your Peugeot 308 key fob stopped working one day, it could be due to a dead coin battery or water damage and receiver module issues or a defective electronic chip. Fortunately, https://www.thekeylab.co.uk/peugeot-car-keys/ are easy to fix and you'll be able to get your car back to normal in no time at all!
Car keys can also get damaged because the blade of the key gets worn. This can be fixed by visiting your local Car Key Man Auto Locksmith and let them install the new key blade for you.
Battery
The key fob in your Peugeot 308 may die or become weak enough to not send a clear signal. This can cause the key fob to cease working which prevents you from locking and opening the doors, or even starting your engine. You'll need a replacement battery for the key fob in order to fix this.
You can purchase a new battery at an auto parts store, or at your local hardware store. When you purchase the battery ensure that it's fresh and hasn't just been sitting on the shelf for a long time. A brand new battery has more capacity and can transmit a stronger signal your vehicle.
After replacing the battery If you have a new battery, try unlocking and locking the doors of your Peugeot with the key fob. If the doors aren't unlocking, it's likely that the receiver module inside the car is the cause. Your local Peugeot dealer can reprogram the receiver module.
img width="427" src="
">
The internal chip of the key fob may also be damaged. It's possible to cause damage to your key fob when you drop it on the ground, or expose it to moisture. The rubber seals that shield the chip from moisture can be worn down over time, especially if your key fob is exposed to water for prolonged periods of time like submerging it in the ocean at the beach. To prevent this from happening, you must protect your key fob from moisture and never let it come into contact with water.
Water Damage
Don't let go of your key fob when it gets wet, regardless of whether you dropped it in the pool or stumbled into a water puddle. The key fob is protected by rubber seals but prolonged exposure to water can damage its electronic chip. Since water is such an excellent conductor, any water that gets inside the key fob may create a series of short circuits that will eventually ruin the chip. After removing the batteries clean the contact surfaces with isopropyl. Dry them completely before putting them back in.
A dead battery can also be the reason your Peugeot 308 won't start. If you have a spare vehicle, jumper cables may be used to get the engine working again. If the battery is the issue, it will need to be replaced.
Another possible cause is a defective receiver inside the vehicle that could hinder it from receiving a signal from the key fob. It could be due to a issue with the antenna or wiring or the key fob might be damaged. If you have an entirely new key fob, it could need to be programmed into the vehicle. If you are unable fix the issue on your own call a professional technician. A trained technician in the field will be able determine the issue quickly and fix the issue immediately.
Radio Interference
Signs like keys not being recognized or having a restricted range of operation usually mean there is a problem in the system. It could be radiated or conducted, with the latter being caused by power supply cables and the speaker wiring being too close to electrical components. In general, rerouting cables and moving them away from these components can solve the issue.
It's unlikely that someone is listening to your key fob signal in order to steal your vehicle It's possible, however, that radio interference has drowned out the signal. Fortunately, this is easy to repair.
If you are having key fob not being recognized, try a new battery. Also, ensure that the battery is the correct size and type. Batteries of the wrong size can damage your fob.
These devices can interfere with the key signal if they are using the same radio frequency. Avoid attaching these devices to your key fob.
Pairing Issues
The remote keyless entry system includes an antenna that receives radio frequency signals from the key fob. It is not possible to start your vehicle if the receiver is malfunctioning, even if your key fob works and can be reprogrammed. This issue could be caused by a variety of ways, such as a dead battery in the coin-cell, or water damage. The receiver may also be malfunctioning due to an internal or software glitch or damage to the key itself.
The battery that powers your Peugeot 308 keyfob is likely to have failed. It is easy to replace it by a new battery but it's essential to get the right battery for your key fob. It is recommended to use a battery that is the same size as well as voltage and specifications as the original.
Another reason that your Peugeot 308 key fob might not be working is that it has been paired to an unrelated vehicle. You may have accidentally given your key fob away to a friend, or the key was used to unlock other vehicles. This issue can be solved by reprogramming your key fob using an OBDII scan. The scanner will usually ask you for certain information regarding your vehicle, such as the VIN or engine type, and it's essential to fill in the correct information.
![[PukiWiki]](image/pukiwiki.png "[PukiWiki]")
