Peugeot 3008 Key Fob Problems
Peugeot's mid-sized 3008 SUV has a lot to offer. It's stylish, it drives well and comes with a big boot. But is it able to beat off strong competition in perhaps the most congested sector of the market?
If your Peugeot keyfob isn't working It could be because it was exposed to soapy or clean tap water. You may need to remove the battery and clean it with electronic cleaner or isopropyl alcohol.
Dead coin battery
Peugeot key fobs are powered by the size of a coin. The power used to operate the remote locking system and other functions. This battery has a limited lifespan and can wear out over the course of years of use. An easy way to determine whether the battery is in good condition is to run the voltage test. A multimeter is used to measure the voltage between the battery's plus and minus poles. This test can determine if the battery is dead.
img width="301" src="
">
If you've been using your Peugeot 3008 for a while and your key fobs have stopped working, there may be an issue with the receiver module. The receiver module is in charge of receiving radio frequency signals sent by key fobs and sending them out to the car's systems. If the receiver module has problems, it won't be able to transmit commands to other modules in the car.
Another reason for an unusable key fob is moisture or sweat that has accumulated on the circuit board. It can trigger short circuits, which will drain the battery and stop the fob's remote locking feature. If this happens you must take your key fob in to a technician that specializes in chip level repairs.
Water damage
Water damage can cause problems regardless of whether you dropped your keyfob into the swimming spa, washed it or left it out in the rain. Water is a great conductor and can easily cause short circuits on the circuit board. It can also cause corrosion to the metal traces as well as other components of the key fob. A wet circuit can cause the battery to lose its charge.
If you have an extra key fob, you can use it to lock/unlock the Peugeot 3008 to rule out a dead coin-cell battery as the source of the issue. Interference signals can also cause your key fob not to function properly. They interfere with the signals sent by the receiver module. These signals could come from a wide range of things, including nearby radio transmitters.
If you hear sloshing noises emanating from your Peugeot 3008 while driving it could be due to a clogged condensate drain from the evaporator. You can identify this by locating the drain holes underneath your door and blowing compressed air in the drain holes. You can also use a flexible wire to move the drain holes around and dislodge any dirt that has collected there. The sound of sloshing could be a sign that there are air pockets within the coolant system.
The receiver module is not working properly.
The receiver module of a Peugeot 3008 is responsible for transmitting a remote keyless signal from the key fob to the receiver in the car. If this module is damaged, it can stop the car from recognizing the key fob. Other factors that can cause the issue include dead batteries water damage or interference with electronic devices that operate at the same frequency as the key fob. In these situations, a message stating "card not detected" might appear on the display.
There are many ways to solve this issue. You might try replacing the battery, or reprogramming the key fob. You could also make use of a spare key to start the car. However, if the key fob isn't working after all these steps, it may have a chip malfunctioning.
It is recommended to remove the chip and clean it using rubbing alcohol and paper towel. If the chip is fried you should purchase an entirely new one. The FB Series enclosures come with an accessory for battery holders for coin cells that is compatible with the most commonly used types of key fob batteries. These enclosures can be customized by using digital printing or CNC-machined cutouts. If your key fob has been exposed to salty or dirty tap water, the chip could be contaminated and require to be cleaned.
Keyless entry systems that fail
If you get the message "card not detected" this means that your vehicle is unable to receive the signal from your key fob. This could be caused by many different reasons such as an insufficient or dead battery. The issue is usually solved by pressing the start button on the key fob. In https://www.thekeylab.co.uk/peugeot-car-keys/ , however, you may need to take your key fob to a Peugeot dealership for additional repairs.
Checking the battery is the first step in troubleshooting an Peugeot 3008 keyfob which doesn't lock or unlock doors. Batteries are the primary reason for a fob that is malfunctioning, but there are other factors that can cause this issue as well. They include worn buttons, and water damage.
If you've recently had your Peugeot key fob exposed to water that is clean it's a good idea remove the battery and dry the electronic components using paper towel. You could also try using isopropyl ethanol or an appropriate cleaner for this. If the fob has been exposed to soap or salty water, it's best to replace it.
If your key fob is not working, try to reset it by disconnecting the battery that is 12 volts for about 15 minutes. Then, reconnect the negative cable first, then followed by the positive cable.
![[PukiWiki]](image/pukiwiki.png "[PukiWiki]")
