Peugeot 308 Key Fob Replacement
Peugeot's 308 may be a bit old however it's still eye-catching. It might not be the most luxurious car in its class It's it's a Ford Focus or Volkswagen Golf will shield you from road imperfections, but it's still a pleasant and comfortable driving experience.
Here at Coded Car Keys we are often asked to replace peugeot 308 key fobs. The following tips can help whether the problem is constant or intermittent.
Water Damage
If you leave your fob in a puddle or get it wet when kayaking, swimming, canoeing, rafting or canyoning, it's probably to be damaged by water. Keep your key fob in a dry bag whenever you are outdoors or engage in activities that expose it to excessive amounts water.
It is also important to make sure that the fob is dry before opening it up and using it again. If you notice any odors emanating from the fob like an industrial-like liquid smell or the scent of windshield washer fluid, this is another sign that it's submerged in water.
A circuit board that's wet can cause the battery to lose its charge, or even explode. If you can remove the 308 keyfob from the water you need to turn the button side up and shake as much water as possible before opening the casing. When you've opened it, take out the battery and wipe the circuit board with an alcohol-soaked cotton swab. 90-percent isopropyl alcohol.
Other reasons why your Peugeot 308 remote keyless entry system might not function include a dead coin battery or receiver module issue, signal interference, or an electronic chip that is defective. If none of these is the issue, try resetting the system by disconnection of the battery at 12 volts for around 15 minutes.
Dead Coin Battery
img width="463" src="
">
Peugeot cars come with a remote-start system which allows the driver to start the car from a distance by warming up or cooling down the car prior to entering. This feature is extremely helpful, especially during winter's cold and chilly months. However, sometimes the remote stop system stops operating due to a range of reasons, such as the battery in the coin is dead.
The coin-shaped battery located inside the key fob could last between two and four years based on how frequently it is utilized, the place it was purchased, and the way it is utilized. Its use-by date is typically printed on the package or listed in the instruction manual.
If the key fob has stopped working after being exposed water that is clean, remove the battery and clean the electronic chip using an absorbent paper towel that has been soaked in isopropyl ethanol. Then, dry the chip thoroughly before replacing. If the key fob has been exposed to soapy or salty water, it could have caused the chip to be damaged. You'll need to replace it.
If you're not sure whether the battery is in good condition you can check its voltage with an instrument connected to the plus and minus terminals. If the voltage is lower than 12-13 volts, then it is time to replace the battery. You can also reset the computer in the onboard computer by disconnection and reconnecting the 12 volt batteries in reverse order. (positive cable first then negative cable). The engine should start after this.
Faulty Receiver Module
If you don't see "Key Detected" It could be the receiver module faulty. https://www.thekeylab.co.uk/peugeot-car-keys/ 's the part that transmits the signal when your key fob goes off. It also functions as an alarm and prevents the car from starting if you don't have the correct key.
It could be due to many reasons, such as water damage or simply the aging process. If the electronic chip inside your Peugeot 308 keyfob has been damaged due to dirty tap water it could be because the keyfob was in contact with it. In this case you'll need to remove the device apart and thoroughly clean it with isopropyl or electronic cleaner. Once it's dry you can put the battery back in and try again.
If the issue isn't resolved you're probably in need of a option to consult a local Peugeot specialist or locksmith. They can utilize a diagnostic tool in order to identify the issue and fix it.
It can be stressful to lose your Peugeot car key. However, a professional auto locksmith can address the issue in only a few minutes. They can program your vehicle and cut a new functioning key for you. Click here to find a locksmith near you.
Faulty Electronic Chip
The electronic chip that is in the Peugeot 308 key fob plays a crucial role in the remote control system. If the chip is damaged, you could encounter issues starting your car or receive a message stating "anti-theft". If this occurs, the only way to fix the problem is to purchase a new key. Luckily, professional auto locksmiths can offer the service in the shortest amount of time.
The chip inside the key fob of your Peugeot 308 could be damaged due to different reasons, such as sweat, water damage, or dirt. If your Peugeot key fob was exposed to soapy or dirty water, it should be cleaned as soon as possible. You can wipe the electronic component using the help of a towel that is soaked in isopropyl Alcohol. The battery should be allowed to fully dry.
Sometimes the key fob may not function due to radio interference. This could be caused by other devices that operate on the same frequency as your Peugeot key fob. This could be due to bad conditions or objects near to the vehicle. It is recommended that you visit a Peugeot dealer in the event of this issue.
The Peugeot 207/308 key fob is extremely delicate and requires a lot of attention. It should not be dropped or throw it around. If you lose something, try to locate it as soon as you are able to. You can reset all on-board computers by disconnecting the battery that is 12 volts for a few minutes. Disconnect the negative cable prior to the positive.
![[PukiWiki]](image/pukiwiki.png "[PukiWiki]")
