Reasons Why Your Nissan Qashqai Key Fob Won't Work
The Qashqai has a distinct SUV-like feel due to its bigger dimensions, and the 19-inch wheels on Ti and ST-L models may be a bit stiff at times. https://www.thekeylab.co.uk/nissan-car-keys/ of Qashqai could also lose grip on rough surfaces, and its CVT can sometimes show wrist-flexing torque steering.
This is typically caused by the battery of a coin that is dead. It can be easily repaired in a matter of minutes. Make sure that the new battery is the same voltage, size, and specification.
Water Damage
img width="403" src="
">
One of the main reasons a Nissan key fob displays the "key ID is incorrect" message is due to water damage. The rubber seals on the key fob guard the electronic chip, but long-term exposure to moisture can cause it not to work properly. This is usually the case when you drop your key fob into the ocean or into a swimming in a pool, but it can happen when it's wet due to rain or soapy hands.
If your key fob is exposed to water for a prolonged period of time, it could need to be cleaned with isopropyl alcohol or an electronic cleaner. It could also require to be sent to a specialist to be repaired or replaced.
If your key fob need to be replaced the process is easy. Make sure you've got the correct multipack (CR2032, 3V). Then, open the back and front cases with a small flathead screwdriver. You'll need to remove the clips for retaining metal and remove the old battery and replace it with the new one. After reassembling the fob, put the mechanical key back into its place and make sure it works as expected. If it doesn't it is necessary to take it to your local Nissan dealer or an experienced locksmith to replace the chip that controls the key. The chip isn't usually damaged by water, so it should not cost a lot.
Dead Coin Battery
Another reason that your Nissan Qashqai key fob may not function is that the battery in the coin has gone dead. They typically last for 3 to 5 years, but they can become depleted over time, particularly if the fob is frequently dropped. You can replace the battery with a fresh one, but be sure that it's the same size and voltage as the original. If you replace the battery, it could cause the key to be assigned a different key ID. This can prevent it from being linked to your vehicle.
The best way to replace the coin battery on the Nissan Qashqai key fob is by opening the fob with an incredibly small screwdriver with a flat head. In the screwdriver, push it into a small notch on the bottom of the fob, and turn it around gently to separate the two halves of the key fob. Remove the old CR2025 battery and replace it with a new one, making note of the position of the old one within the fob.
Before you put the new battery in ensure that there isn't any dirt or water damage to the terminals. If there is, wash the terminals with a small amount of isopropyl alcohol. Make sure that the pole cables are properly connected. They should be connected to the positive and negative poles of your battery.
Troubleshooting
If your Nissan Qashqai's keys fob stops functioning after being exposed to clean water from the tap or rain it could be a sign there's an issue with the internal chip. You'll require a new keyfob if you can't solve the issue by changing the battery. If the key fob didn't work after you dropped it, it is likely that the chip inside was damaged. If you clean the chip using isopropyl alcohol and paper towel and then put it back in the key fob, you'll generally get it working.
Key ID Incorrect is a typical error that can be seen on the dashboard of your car. This means that the vehicle cannot recognize the key fob and not allow it to start the engine. The issue can be caused by a variety of factors such as water damage, undetectable malfunctions in the circuitry of the key fob, or RFID interference.
The key fob won't work in the event that the 12 volt batteries are dead or do not provide sufficient electric current. This can affect the remote keyless system and central locking of your Nissan Qashqai, as well as making it impossible to start your engine with the key fob (if equipped with Intelligent Key). Examine the batteries on the key fob if you are in a position to lock or unlock your door manually. You could also try reinstalling the battery to reset your transmitter.
Reprogramming
If the key fob was not submerged in saltwater, it should be able be restored to its original state by a simple wash of clean water. You might also try cleaning your electronic chip using isopropyl Alcohol or an electronic cleaner. If none of these work then you might need to replace the key fob.
If your Nissan Intelligent Key is still not working, it could be an issue with the connection between it and the car. Start by pressing the ignition key, but without beginning the car. Repeat this process until the hazard light flashes two times. Then, turn off the vehicle and take off the key.
Open the fob compartment in your vehicle. It's usually found on a door jamb or the handle of the driver's door. Locate the small button labeled "program" and press it. After the program is complete you will hear an audible sound.
Now that your Intelligent Key is relinked to the car now is the time to try it out. You must stand a certain distance away from the vehicle and hit all the buttons on it. If the lights flash, or the horn sounds, the key is successfully connected to the Nissan. You can also test it close to the Nissan.
![[PukiWiki]](image/pukiwiki.png "[PukiWiki]")
